Broseley eVolution 5 Provozní pokyny

MS07-11 Issue 4b 1 Installation & Operating Instructions Covering Models: eVolution 5 Wood Burning Stove (Sta

MS07-11 Issue 4b 10 Assembly The diagram below shows the stove with all internals taken out. To install the internals simply follow the

MS07-11 Issue 4b 11 Assembly For log store versions, it is possible to remove the stove from the log store base for transport purposes.

MS07-11 Issue 4b 12 Assembly for Smoke Exemption When installing this appliance into a smoke control area you will need to change the washer th

MS07-11 Issue 4b 13 Controls Layout The diagram below shows the position of the air control, this control needs to be operated correctly to con

MS07-11 Issue 4b 14 Controls Explained Fire needs air to burn therefore the stove is fitted with an air control that allows you to regulate the

MS07-11 Issue 4b 15 Recommended Fuels This appliance has obtained approval from HETAS Ltd., for burning – * Split Hardwood logs not exceeding

MS07-11 Issue 4b 16 Lighting the Stove Curing On initial firing you will notice a very pungent odour, this is caused through the curing of the

MS07-11 Issue 4b 17 Burning Wood Once you have kindled your stove (see previous page) and your chimney (flue) is sufficiently heated, you are n

MS07-11 Issue 4b 18 Smoke Exempt Requirements The eVolution 5 Wood burning stove has been tested by GASTEC under the PD6434 standard and has pa

MS07-11 Issue 4b 19 Smoke Exempt Requirements 1. It is important to follow the smoke exempt instructions in order to achieve clean burning a

MS07-11 Issue 4b 2 Contents Introduction 3 Packing List 3 Health & Safety 4 Specifications

MS07-11 Issue 4b 20 Warning Notes Over-Firing It is extremely important that you do NOT leave the air control in the fully open position for e

MS07-11 Issue 4b 21 Maintenance Ash Removal The ash pan can be accessed by lifting out the grate. The tool can be used for this task. It is re

MS07-11 Issue 4b 22 Trouble-shooting Smoke comes out of the stove when the loading door is opened. • The chimney cavity into which the 15

MS07-11 Issue 4b 23 Commissioning Form Commissioning Statement and Check-list Stove Purchased From:___________________________________________

MS07-11 Issue 4b 24 Spare Parts (1) M8 Nut (2) M6 Washers (3) M8 Threaded Rod (4) M8 Threaded Spacer (5) Left Side Casting (6) M8 Nut (7) S

MS07-11 Issue 4b 25 EC Declaration DECLARATION OF CONFORMITY ACCORDING TO DIRECTIVES 89/106/EEC (CONSTRUCTION PRODUCTS) ISSUED BY:

MS07-11 Issue 4b 26 Annual Service Record 1ST YEAR SERVICE completion date: SERVICE ENGINEER: REG. No. COMPANY NAME: .

MS07-11 Issue 4b 27 Warranty This appliance must be installed and commissioned by a fully qualified, registered engineer. A “Declaration of com

MS07-11 Issue 4b 3 Introduction May we take this opportunity to thank you for choosing one of our stoves. These appliances are desi

MS07-11 Issue 4b 4 Health & Safety Special care must be taken when installing the stove such that the requirements of the Health a

MS07-11 Issue 4b 5 Specifications In the UK these stoves have been approved by HETAS Ltd as intermittent heating appliances for burnin

MS07-11 Issue 4b 6 Dimensions All dimensions are in millimetres

MS07-11 Issue 4b 7 Hearth Requirements & Clearances These appliances are suitable for non-combustible hearths with a minimum thickness of 1

MS07-11 Issue 4b 8 Chimney Requirements This appliance must not be fitted into a chimney serving another heating appliance. It is most importa

MS07-11 Issue 4b 9 Combustion Air Requirements In order for the stove to perform efficiently and safely there should be an adequate air supply